Fiber Laser — Hybrid (Sheet and Tube)
Hybrid fiber laser that combines sheet and tube/profile cutting in a single body. A 150×300 cm sheet table and a tube unit for plants with limited floor space that want both jobs on one machine.
- Sheet and tube cutting in a single body
- 150×300 cm sheet table + 22-chuck tube unit
- One body instead of two machines, using less floor space
Fiber Laser — Hybrid (Sheet and Tube), inside and out
From frame design to hardware options: how the machine works and which jobs and production lines it suits.
A hybrid fiber laser that combines sheet and tube/profile cutting in a single body. The sheet table and the tube processing section are gathered in the same machine, so one investment covers both sheet and section work and floor space is saved.
This configuration is offered with a 150×300 cm sheet table and a 22-chuck tube unit. On the tube side it works with diameters of 60–320 mm; on the sheet side the cutting head travels 62–156 mm. Laser power is selected between 1 and 12 kW; H/I profile support depends on the model and equipment.
It is a flexible solution for plants producing varied work at medium intensity: you can switch between sheet panels and structural profiles within the same shift. The cutting head is auto-focus and is matched to the selected power and to the sheet / tube / hybrid application.
Control uses A4 TECH Pulse, RAYTOOLS EtherCAT or CypCut EtherCAT, with VEICHI, INOVANCE, Delta or Yaskawa AC servo on the motion side. Nesting software, dual shuttle tables and a tube cutting line are optional.
When choosing, look at the ratio of your sheet and tube work. If both run regularly and space is tight, a hybrid makes sense; if one is heavy on its own, a dedicated machine may fit better.
What sets Fiber Laser — Hybrid (Sheet and Tube) apart
The strengths that make a difference on the shop floor, in brief. Detailed values are in the Technical Specifications tab; choose the hardware for your needs in the configurator.
- Sheet and tube cutting in a single body
- 150×300 cm sheet table + 22-chuck tube unit
- One body instead of two machines, using less floor space
- 60–320 mm tube diameter range
- 1–12 kW power options
- Nesting and automatic feeding options
In numbers Fiber Laser — Hybrid (Sheet and Tube)
All values are for the standard configuration. For specific needs we share configuration options during the quotation process.
Cooling: a dual-circuit chiller matched to the power of the laser source and the cutting head. Lubrication is manual, semi-automatic or fully automatic depending on the level. Fume extraction is internal ducting only on ORIGO and NEXORA; ZENITH adds a 7.5 kW · 380 V · 3000 rpm medium-high pressure motor with a zoned automatic open–close extraction system.
The cabinet is PRIME-designed; the status indicator shows blue on standby, green while running and red on fault. Software and automation options: nesting, dual table, loading–unloading and tube line.
About Fiber Laser — Hybrid (Sheet and Tube)
If you alternate between sheet and tube work and want to conserve floor space, a hybrid fits. If either job is heavy on its own, separate machines can carry the capacity more comfortably. Working out the weekly ratio of the two helps with the decision.
The tube unit works with diameters of 60–320 mm. If you need a wider range or a flow built around automatic feeding, we suggest also looking at the dedicated tube and profile cutting line.
H/I profile support depends on the model and equipment. Specify the profile type and size you plan to cut at the quote stage. The configuration is then settled accordingly.
This configuration comes with a 150×300 cm sheet table. If you work with larger sheets, the open and enclosed cabin sheet machines offer larger table options. Decide by the sheet size you use most often.
Pricing depends on laser power, control and motion equipment and the options added. Use the Configure button to make selections and request a quote, or use the quote form or WhatsApp.
You may also like
Fiber Laser — Tube and Profile Cutting Line
Fiber laser line for cutting round, square and rectangular tube and profile. Automatic feeding options include a bundle loader and chain magazine, with 1–12 kW power for section-processing plants.
Request a quote
for Fiber Laser — Hybrid (Sheet and Tube)
Your request goes directly to our team for Fiber Laser — Hybrid (Sheet and Tube) . We will get back to you within one business day with pricing and delivery information.
